Three-Quarter Bluestone in Bellingham, MA

Looking for three-quarter bluestone in Bellingham, MA? Ten Four Landscape Supply delivers three-quarter bluestone across Bellingham from our yard at 26 Industrial Rd in Wrentham, and we also load pickups right at the yard. Bellingham sits at the western edge of our area, along Route 126 and Route 495. Even so, it is a regular stop, and Bellingham loads tend to be on the larger side.

Three-Quarter Bluestone delivery in Bellingham, MA

The Charles River and Silver Lake run through town, and many homes sit on generous lots with room for big projects. Because many Bellingham lots are large, orders for loam, mulch and stone often come in several yards at a time.

Bellingham projects often use stone around pools, for driveway repairs and for drainage on larger lots. For that reason, three-quarter bluestone is a regular order in Bellingham. In short, our ¾″ Bluestone is crushed bluestone for driveways, drainage and base layers, and it is sold by the cubic yard.

Why Bellingham customers choose our three-quarter bluestone

It is crushed stone screened so most pieces are about three-quarters of an inch. Because the stone is crushed rather than rounded, every piece has sharp faces. Those faces bite into each other, so the surface stays firm instead of rolling underfoot.

The color is a blue-gray that darkens when wet. Also, it looks clean and neat, which is why many people use it for driveways and parking areas that show from the street.

Popular uses for three-quarter bluestone in Bellingham

Homeowners and contractors in Bellingham put three-quarter bluestone to work in many ways. Contractors and homeowners use this stone for a long list of jobs:

• Gravel driveways and parking areas
• Drainage trenches and French drains
• Base under sheds and hot tub pads
• Backfill around foundation drains
• Drip edges along rooflines
• Pipe and dry well surrounds

How much three-quarter bluestone does a Bellingham project need?

First, measure the area in feet and multiply length by width. Then multiply by the depth in inches and divide by 324. The result is cubic yards, which is how we sell three-quarter bluestone. For a gravel driveway, plan on 3 to 4 inches of three-quarter bluestone over a firm base. Drainage trenches, on the other hand, are sized by trench width and depth.

For example, a typical Bellingham job of about 1,200 square feet needs roughly 11 yards at 3 inches, or 15 yards at 4 inches. Still, round up by half a yard for edges and settling. Or call (774) 372-1050, and we will check the math before the truck is loaded.

Delivery or pickup for Bellingham, MA

We deliver three-quarter bluestone in Bellingham, MA by truck, placing the pile where you want it. Most Bellingham driveways handle our trucks well. Still, tell us about gates, pools or septic areas near the drop spot so the driver can avoid them.

1. Book the load. Call or send a quote request with the amount of three-quarter bluestone and your Bellingham address.
2. Pick the drop spot. Next, choose firm, open ground close to the work area, clear of wires and branches.
3. Protect the surface. Then lay a tarp or plywood on pavement, so cleanup takes minutes.
4. Meet the truck. Finally, the driver calls ahead and places the pile as close to your spot as the ground safely allows.

Picking up at the yard

For Bellingham customers, the yard is a short highway drive east, so contractors often pick up between jobs. As a rule, a full-size pickup carries about about 1 yard of this material safely. So check your payload rating, and bring a tarp for the ride back to Bellingham.

When to order three-quarter bluestone in Bellingham

Stone can go down in any season, as long as the ground is not frozen or soaked. So many Bellingham customers schedule stone work in late spring and early fall, when it is cooler to shovel and rake. Also, fall is a good time to fix drainage before the snow melts.

How to lay a three-quarter bluestone driveway

1. Strip the surface. Remove sod and soft topsoil down to firm ground. Then shape the area so water runs off to the sides.
2. Set a base if needed. On soft ground, a layer of processed gravel underneath adds strength. Ask us what fits your soil.
3. Spread in lifts. Spread the stone about 2 inches at a time. Next, pack each lift with a plate compactor or roller.
4. Crown the center. Keep the middle slightly higher than the edges. As a result, rain sheds off instead of pooling.
5. Top up over time. Finally, rake stone back into tire tracks and add a little each year.

Three-Quarter Bluestone in Bellingham, MA: FAQs

More for your Bellingham project

For a smoother top, some people finish a driveway with finer stone. For example, ⅜″ bluestone fills gaps well. Asphalt millings, meanwhile, give a darker surface that packs harder. So if your Bellingham project needs more than one material, see ⅜″ Bluestone in Bellingham, Screened Asphalt Millings in Bellingham and 1½″ Natural Stone in Bellingham. As a result, one delivery can often cover the whole job.

We also deliver three-quarter bluestone to nearby Franklin, Medway and Wrentham. For depth tips, coverage and product details, read the full ¾″ Bluestone guide, or see every town we serve. For local background, Bellingham on Wikipedia is a good start.