Field Stone in Bellingham, MA

Looking for field stone in Bellingham, MA? Ten Four Landscape Supply delivers field stone across Bellingham from our yard at 26 Industrial Rd in Wrentham, and we also load pickups right at the yard. Bellingham sits at the western edge of our area, along Route 126 and Route 495. Even so, it is a regular stop, and Bellingham loads tend to be on the larger side.

Field Stone delivery in Bellingham, MA

The Charles River and Silver Lake run through town, and many homes sit on generous lots with room for big projects. Because many Bellingham lots are large, orders for loam, mulch and stone often come in several yards at a time.

Bellingham projects often use stone around pools, for driveway repairs and for drainage on larger lots. For that reason, field stone is a regular order in Bellingham. In short, our New England Field Stone is weathered, irregular fieldstone for walls, borders and accents, and it is sold by the cubic yard.

Why Bellingham customers choose our field stone

Field stone is naturally rounded and irregular, with soft edges from years of weather and frost. The colors run from gray and tan to brown with lichen tones, so every piece is a little different.

Because it is not cut, field stone suits informal designs. For example, it makes dry-laid garden walls, bed borders, stepping pieces and accent boulders. As a result, it blends into yards that border woods and older homes especially well.

Popular uses for field stone in Bellingham

Homeowners and contractors in Bellingham put field stone to work in many ways. Here is what people build most often with it:

• Low dry-laid garden and boundary walls
• Borders around beds and tree rings
• Informal steps set into a slope
• Accent stones and small boulder groupings
• Edging along wood chip and stone paths
• Fire pit surrounds and seating walls

How much field stone does a Bellingham project need?

First, measure the area in feet and multiply length by width. Then multiply by the depth in inches and divide by 324. The result is cubic yards, which is how we sell field stone. Field stone is not spread like mulch, so the depth columns below are only a rough guide for a stone border. For walls, instead, tell us the length and height, and we will estimate the load.

For example, a typical Bellingham job of about 1,200 square feet needs roughly 15 yards at 4 inches, or 22 yards at 6 inches. Still, round up by half a yard for edges and settling. Or call (774) 372-1050, and we will check the math before the truck is loaded.

Delivery or pickup for Bellingham, MA

We deliver field stone in Bellingham, MA by truck, placing the pile where you want it. Most Bellingham driveways handle our trucks well. Still, tell us about gates, pools or septic areas near the drop spot so the driver can avoid them.

1. Book the load. Call or send a quote request with the amount of field stone and your Bellingham address.
2. Pick the drop spot. Next, choose firm, open ground close to the work area, clear of wires and branches.
3. Protect the surface. Then lay a tarp or plywood on pavement, so cleanup takes minutes.
4. Meet the truck. Finally, the driver calls ahead and places the pile as close to your spot as the ground safely allows.

Picking up at the yard

For Bellingham customers, the yard is a short highway drive east, so contractors often pick up between jobs. As a rule, a full-size pickup carries about less than a yard of this material safely. So check your payload rating, and bring a tarp for the ride back to Bellingham.

When to order field stone in Bellingham

Stone can go down in any season, as long as the ground is not frozen or soaked. So many Bellingham customers schedule stone work in late spring and early fall, when it is cooler to shovel and rake. Also, fall is a good time to fix drainage before the snow melts.

How to build a low field stone wall

1. Dig a trench. Dig a shallow trench a few inches deep along the wall line. Then fill it with crushed stone for drainage.
2. Set the base stones. Place the largest, flattest pieces first. As a result, the whole wall sits on a solid footing.
3. Lean it back. Stack each course slightly back toward the uphill side. That lean keeps the wall stable over time.
4. Cross the joints. Set every stone over the joint below, just like bricks. Next, pack small stones into the gaps.
5. Cap it. Finally, choose flatter stones for the top course so the wall looks finished and sheds water.

Field Stone in Bellingham, MA: FAQs

More for your Bellingham project

Field stone frames other materials beautifully. For instance, it edges a wood chip path or a hemlock-mulched bed. Meanwhile, crushed stone makes the drainage base under a wall. So if your Bellingham project needs more than one material, see Natural Wood Chips in Bellingham, Pure Hemlock Mulch in Bellingham and ¾″ Bluestone in Bellingham. As a result, one delivery can often cover the whole job.

We also deliver field stone to nearby Franklin, Medway and Wrentham. For depth tips, coverage and product details, read the full New England Field Stone guide, or see every town we serve. For local background, Bellingham on Wikipedia is a good start.